Tensile Membrane Structure Design Details | Birdair Inc.

Standard Perimeter Clamping

Standard Perimeter Clamping

Incorporating Separate Outer and Liner Membranes

Base plate and standard clamp bar configuration

Base plate and standard clamp bar configuration

With outer and liner clamped independently

Standard PE extrusion clamping

Standard clamping detail to a tube steel member

Standard clamping detail to a tube steel member

With independent clamping for outer and liner

Standard clamp bar with 30 degree stand-off plate

Standard clamp bar with 30 degree stand-off plate

With independent outer and liner membrane

Standard lacing detail

Crown or top ring clamping and jacking detail

Catenary Cable in a Cuff

Catenary edge clamping w/ aluminum straps

Standard single plate sectionalizing detail

PE Extrusion w/ a U-strap on a Cable

Catenary Cable in a Cuff w/ a Foam Diverter

Hold-down Clamping

PE Extrusion with U-Strap + Catenary Cable

Standard Extrusion for Single Layer ETFE

With Cable Reinforcement

Standard Extrusion for 2 (or 3) Layer ETFE Cushion

With Single Keder

Standard Extrusion for 3 (or more) Layer ETFE Cushion

With Double Keder

Standard Gutter Extrusion for a 2 Layer ETFE Cushion

Roof Type: Cone

Roof Type: Crossed Arch

Roof Type: Dome

Roof Type: Barrel Vault

Roof Type: Flying Mast

Roof Type: Folded Plate

Roof Type: Hypar

Roof Type: Flat

Roof Type: Shape

Roof Type: Sail